Festo QSW-12HL Pneumatic Push-in Connector

Selling Points

1The QSW-12HL features a 45° angle design, making it easy to install and reducing the risk of kinking or damage to the pneumatic tubing.
2Constructed with PBT (Polybutylene Terephthalate) for the body, POM (Polyoxymethylene) for the releasing ring, and high-alloy stainless steel for the tube retaining claw, ensuring high corrosion resistance and durability.
3Compatible with compressed air up to 6 bar and water up to 0.6 MPa, with a temperature range of -10°C to 80°C, making it suitable for a wide range of applications.
4The optimized bending radius of the QSW-12HL makes it easy to install, reducing the effort required for connecting pneumatic tubing.
5Meets ISO 8573-1:2010 standards and is RoHS compliant, ensuring it meets environmental and safety regulations.

Detailed engineering parameters based on manufacturer documentation

Parameter	Value	Parameter	Value
Size	Standard	Nominal width	6.9mm
Mounting position	Any	Design	45° angle, long
Pack size	10	Structural design	Push-pull principle
Operating pressure for entire temperature range	-13.775psi 87psi	Temperature-dependent operating pressure	-13.775psi 203psi
Information on operating pressure	Water: max. 0.6 MPa at max. 50 °C	Operating medium	Compressed air as per ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Information on operating and pilot media	Operation with oil lubrication possible	Corrosion resistance class (CRC)	1 - Low corrosion stress
LABS (PWIS) conformity	VDMA24364-B1/B2-L	Cleanroom class	Class 4 according to ISO 14644-1
Ambient temperature	-10°C 80°C	Product weight	14.5g
Pneumatic connection 1	Push-in sleeve ? 12 mm	Pneumatic connection 2	for pneumatic tubing outside diameter 12 mm
Releasing ring color	Blue	Note on materials	RoHS-compliant
Housing material	PBT	Releasing ring material	POM
Material of tubing seal	NBR	Material of tube retaining claw	High-alloy stainless steel
Manufacturer ID	130621

Specifications may be subject to change without notice