Product Model

FL SWITCH SF 15TX/FX

In Stock
Last updated: 2025/5/1
Phoenix Contact FL SWITCH SF 15TX/FX

Selling Points

  • 115 RJ45 Ports: Supports up to 15 Ethernet connections via RJ45 ports.
  • 2Auto Negotiation & Autocrossing: Simplifies installation with automatic detection of data transmission speed and autocrossing function.
  • 3100 Mbps Full Duplex: Ensures high-speed data transfer with 100 Mbps full duplex transmission speed.
  • 4Local Diagnostic Indicators: Includes LEDs for data receive, link status, and activity per port for easy diagnostics.
  • 5Security Options: Features cable locking and relay contact for alarm processing of voltage states for enhanced security.
Product Details
FL SWITCH SF 15TX/FX
Phoenix Contact

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

ParameterValueParameterValue
Width
205 mm
Height
115.3 mm
Depth
30 mm
Housing material
Aluminum
Mounting type
DIN rail mounting
Connection method
RJ45
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps
Transmission physics
Ethernet in RJ45 twisted pair
Transmission length
100 m (per segment)
Signal LEDs
Data receive, link status
No. of channels
15 (RJ45 ports)
Connection method
SC
Transmission speed
100 Mbps (full duplex)
Transmission physics
multi-mode fiberglass
Transmission length
6400 m (fiberglass with F-G 50/125 0.7 dB/km F1200)
Wavelength
1300 nm
No. of channels
1 (SC multi-mode)
Connection method
Plug-in/screw connection via COMBICON
Product type
Switch
Product family
Unmanaged Switch SF
Type
Block design
MTTF
50.3 Years (MIL-HDBK-217F standard, temperature 25°C)
Article revision
12
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Basic functions
Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Status and diagnostic indicators
LEDs: U
Additional functions
Autonegotiation
Basic functions
Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Local diagnostics
US1/2 Supply voltage Green LED LNK/ACT Link status/data transmission Green LED 100 Data transmission speed Yellow LED
Maximum power dissipation for nominal condition
7.92 W
Test section
500 V DC 1 min
Transmission medium
Copper FO
Supply voltage (DC)
24 V DC (redundant)
Supply voltage range
18.5 V DC ... 30.2 V DC
Power supply connection
Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple
3.6 V
Typical current consumption
193 mA (at U
Connection method
Screw connection
Conductor cross section, rigid
0.2 mm² ... 2.5 mm²
Conductor cross section, flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Stripping length
7 mm
Degree of protection
IP20
Ambient temperature (operation)
0 °C ... 55 °C
Ambient temperature (storage/transport)
-20 °C ... 70 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)
86 kPa ... 108 kPa (up to 1500 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37
Sulfur dioxide (SO
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Conformance with EMC directives
IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) Criterion A IEC 61000-6-2 IEC 61000-4-4 (burst) Criterion A IEC 61000-6-2 IEC 61000-4-5 (surge) Criterion A IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) Criterion A IEC 61000-6-2 IEC 61000-4-8 (immunity to magnetic fields) Criterion A IEC 61000-6-2 EN 55022 (emitted interference) Criterion A
Noise immunity
EN 61000-6-2:2005
Noise emission
EN 61000-6-4
Basic functions
Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Status display
LEDs: U

Specifications may be subject to change without notice