Product Model
IB IL RS UNI-PAC
Selling Points
- No selling points available for this product.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
Width | 24.4 mm | Height | 135 mm |
Depth | 71.5 mm | Note on application | Only for industrial use |
CCCex note | Use in potentially explosive areas is not permitted in China. | Number of interfaces | 2 |
Connection method | Inline data jumper | Transmission speed | 500 kbps |
Number of interfaces | 1 (be operated simultaneously) | Connection method | Spring-cage connection |
Note on the connection method | Use shielded cables. | Transmission speed | 110 bps ... 250000 bps (can be parameterized) |
Transmission physics | Copper | Protocols supported | Transparent, end-to-end, XON/XOFF |
Termination resistor | typ. 120 Ω (active, integrated) | Data bits | 5 ... 8 |
Stop bits | 1 or 2 | Input buffer | 4 kByte |
Output buffer | 1 kByte | ID code (dec.) | 223 |
ID code (hex) | DF | Length code (hex) | 1F |
Length code (dec) | 31 | Process data channel | 496 bit |
Input address area | max. 62 Byte | Output address area | max. 62 Byte |
Register length | 64 Byte | Required parameter data | 23 Byte |
Required configuration data | 5 Byte | Product type | I/O component |
Product family | Inline | Type | modular |
Scope of delivery | including Inline connectors and marking fields | Article revision | 10 |
Overvoltage category | II (IEC 60664-1, EN 60664-1) | Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Maximum power dissipation for nominal condition | 1.3 W | Supply voltage | 7.5 V DC (via voltage jumper) |
Current draw | max. 90 mA (all connections of the serial interface are short-circuited)
typ. 78 mA | Supply voltage | 24 V DC (via voltage jumper) |
Current draw | max. 25 mA
typ. 15 mA | Test voltage: Serial interface/7.5 V supply (bus logic) | 500 V AC, 50 Hz, 1 min |
Test voltage: Serial interface/24 V supply U | 500 V AC, 50 Hz, 1 min | Test voltage: Serial interface/functional ground | 500 V AC, 50 Hz, 1 min |
Test voltage: 7.5 V supply (bus logic)/functional ground | 500 V AC, 50 Hz, 1 min | Test voltage: 24 V supply (U | 500 V AC, 50 Hz, 1 min |
Connection name | Inline connector | Connection method | Spring-cage connection |
Conductor cross section rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
Connection method | Spring-cage connection | Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
Stripping length | 8 mm | Ambient temperature (operation) | -25 °C ... 55 °C |
Degree of protection | IP20 | Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Mounting type | DIN rail mounting |
Specifications may be subject to change without notice