Schneider ATS22D62Q Digital Soft Starter

Selling Points

1The ATS22D62Q is designed for simple connection and easy commissioning.
2Features a built-in bypass function for seamless operation.
3Includes adjustable electronic overload for enhanced safety.
4Supports fieldbus communications for integrated control.
5Equipped with motor thermal protection and overvoltage protection for reliable operation.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Parameter	Value	Parameter	Value
Range of Product	Altistart 22	Product or Component Type	Soft starter
Product destination	Asynchronous motors	Product Specific Application	Pumps and fans
Component name	ATS22	Phase	3 phase
[Us] rated supply voltage	230...440 V - 15...10 %	Motor power kW	15 kW 230 V<br />30 kW 400 V<br />30 kW 440 V
Factory setting current	57 A	Power dissipation in W	59 W for standard applications
Utilisation category	AC-53A	Type of start	Start with torque control (current limited to 3.5 In)
IcL starter rating	62 A connection in the motor supply line for standard applications	IP Degree of Protection	IP20
Assembly style	With heat sink	Function Available	Internal bypass
Supply voltage limits	195…484 V	Supply frequency	50...60 Hz - 10...10 %
Network Frequency	45...66 Hz	Device connection	To the motor delta terminals<br />In the motor supply line
[Uc] control circuit voltage	230 V - 15...10 % 50/60 Hz	Control circuit consumption	20 W
Discrete output number	2	Discrete output type	Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O<br />Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Minimum switching current	100 mA 12 V DC relay outputs)	Maximum switching current	5 A 250 V AC resistive 1 relay outputs<br />5 A 30 V DC resistive 1 relay outputs<br />2 A 250 V AC inductive 0.4 20 ms relay outputs<br />2 A 30 V DC inductive 7 ms relay outputs
Discrete input number	3	Discrete input type	LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete input voltage	24 V <= 30 V	Discrete input logic	Positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
Output current	0.4...1 Icl adjustable	PTC probe input	750 Ohm
communication port protocol	Modbus	Connector Type	1 RJ45
Communication data link	Serial	Physical interface	RS485 multidrop
Transmission Rate	4800, 9600 or 19200 bps	Installed device	31
Protection type	Phase failure line<br />Thermal protection motor<br />Thermal protection starter	marking	CE
Type of cooling	Forced convection	Operating position	Vertical +/- 10 degree
Height	11.6 in (295 mm)	Width	5.7 in (145 mm)
Depth	8.1 in (207 mm)	Net Weight	26.5 lb(US) (12 kg)
Motor power range AC-3	15…25 kW 200…240 V 3 phase<br />30…50 kW 380…440 V 3 phase	Motor starter type	Soft starter
Electromagnetic compatibility	Conducted and radiated emissions level A IEC 60947-4-2<br />Damped oscillating waves level 3 IEC 61000-4-12<br />Electrostatic discharge level 3 IEC 61000-4-2<br />Immunity to electrical transients level 4 IEC 61000-4-4<br />Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3<br />Voltage/current impulse level 3 IEC 61000-4-5	Standards	IEC 60947-4-2
Product Certifications	C-tick<br />CCC<br />UL<br />CSA<br />GOST	Vibration resistance	1 gn 13…200 Hz)IEC 60068-2-6<br />1.5 mm 2…13 Hz)IEC 60068-2-6
Shock resistance	15 gn 11 ms IEC 60068-2-27	Noise level	45 dB
Pollution degree	Level 2 IEC 60664-1	Relative humidity	0…95 % without condensation or dripping water IEC 60068-2-3
Ambient air temperature for operation	14…104 °F (-10…40 °C) without derating)<br />104…140 °F (40…60 °C) with current derating 2.2 % per °C)	Ambient Air Temperature for Storage	-13…158 °F (-25…70 °C)
Operating altitude	<= 3280.84 ft (1000 m) without derating<br />> 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m

Specifications may be subject to change without notice