Industrial Control Products

WAGO Edge Controller 752-8303/8000-002 combines PLC and Linux functions, ideal for industrial automation with real-time control and multiple interfaces.

WAGO 793-4658 WMB marking card for terminal blocks. Snap-on type, vertical marking, white.

Shield clamping saddle for DIN rail terminal blocks, 21.8 mm wide, suitable for 6-16 mm conductors.

WAGO 793-4995 marking card for labeling terminal blocks. ROHS compliant, snap-on, and stretchable.

14-pole connection cable with pluggable connector per DIN 41651, 2m long, and 0.14 mm² conductor cross-section.

4-conductor chassis-mount terminal strip for Ex e II applications, without ground contact, PE-N-L1-L2 configuration.

WAGO WMB marking card, blue, with numbers 41-50. Snap-on type for 5mm wide terminal blocks.

WAGO 2091-1105/002-000: 1-conductor female connector with push-button and Push-in CAGE CLAMP®. Suitable for 1.5 mm² wires and 3.5 mm pin spacing.

Universal PCB terminal block with Push-in CAGE CLAMP connection for solid and ferruled conductors. Ideal for panel feedthrough applications.

11-pole PCB terminal block with push-in CAGE CLAMP, rated for 41 A and 400 V, suitable for various PCB applications.

The WAGO 750-1422 is a 4-channel digital input module for DIN rail mounting, operating at 24 VDC with a 3 ms response time.

SSI transmitter interface unit for encoding applications with 13-bit resolution, 125 kHz frequency, and Gray code.

4-channel analog input module with ±10 VDC range, single-ended inputs, and IP20 protection. Ideal for industrial applications.

WAGO 750-469/000-003 is a 2-channel analog input module for thermocouples and low voltage measurements with diagnostics and adjustable settings.

WAGO 788-101 relay socket for 15 mm x 25 mm basic relays. Features 1 changeover contact and is available in gray.

Stackable PCB terminal block with 2.5 mm² wire size, 5/5.08 mm pin spacing, and CAGE CLAMP® technology.

2-conductor/2-pin double-deck terminal block for 2.5 mm² wires, with internal commoning.

WAGO 734-320/019-000 male connector, 1-conductor, CAGE CLAMP series, 1.5 mm² wire size, 3.5 mm pin spacing.

Mini-WSB marking card by WAGO, marked with numbers 1-100, for horizontal marking, snap-on type.

Universal 2-conductor female connector with push-in CAGE CLAMP, ideal for 2.5 mm² conductors and 5.08 mm pin spacing.