Industrial Control Products

The WAGO 2857-534 is a configurable JUMPFLEX signal conditioner with a TC threshold value switch and picoMAX® connector, suitable for various industrial applications.

Angled 2-pole socket for PCBs, Cod. A, 0.25 - 1.5 mm² wire range, 250 V, 16 A.

The WAGO 870-573 is a 2mm thick gray end and intermediate plate for PG 16 terminal blocks, ideal for electrical installations.

WAGO 714-145 THT male header, 15-pole, 3.5 mm pin spacing, 0.8 x 0.8 mm solder pins.

Angled 4-pole plug for PCBs with Cod. A, made from Polyamide (PA66) and chrome nickel spring steel, suitable for general mains applications.

WAGO USA 869-110 2-conductor terminal strip with 10 poles, M3 fixing flanges, and push-in/spring termination style.

WAGO 870-949 separator plate, 1mm thick, orange, for rail-mounted terminal blocks.

WAGO 713-1476 is a 2-row THT male header with 0.8 x 0.8 mm solder pins, 3.5 mm pin spacing, and 32 poles. It is 100% protected against mismating and features an orientation nose.

Monitors and reports signals for up to two switching thresholds. Compatible with RTD sensors, potentiometers, and resistors.

3-conductor through terminal block with test port, CAGE CLAMP technology, and DIN-rail compatibility.

WAGO 890-824 is a 4-pole angled socket for PCBs, with a nominal voltage of 400V and max temperature of 40°C.

WAGO 282-325 End and Intermediate Plate for rail mounted terminal blocks, 2.5 mm thick, gray.

Rail-mounted terminal block set with fixing flanges, suitable for 2/0 AWG stranded and 1/0 AWG solid conductors.

WAGO 2004-408: An 8-way insulated jumper for TOPJOB S series, suitable for industrial and building applications.

WAGO 714-175 angled THT male header, 15 poles, 3.5mm pin spacing. Suitable for reliable PCB connections.

Robust PLC CPU unit with ARM Cortex-A8 1GHz processor, 512MB RAM, and 4GB internal flash memory. Supports multiple communication protocols.

DIN rail 2-conductor terminal block with CAGE CLAMP® technology, up to 2.5 mm² nominal cross-section.

The WAGO 769-130 is a 2-conductor female connector featuring CAGE CLAMP® technology, designed for 4 mm² conductors with 5 mm pin spacing.

WAGO 793-604/000-002 WMB marking card, vertical snap-on type, yellow, not stretchable. Includes 10 marked cards (21-30).

WAGO 869-339 2-conductor end terminal block for rail mounting, suitable for plate thickness 0.6 - 1.2 mm.